HP/AGILENT 8971C NOISE FIGURE TEST SET, 10 MHZ-26.5 GHZ

Bookmark and Share
Our Price:
Please call for a quote
Item #:
8971C
Manufacturer:
Model #:
8971C
Condition:
Seller Refurbished
Quantity
The Agilent 8971C noise figure test set allows the 8970B to make noise figure measurements over an extended frequency range. Careful design and high-performance components, including a stable YIG filter, allow broadband single-sideband measurements from 10 MHz to 26.5 GHz with a single calibration and sweep. A low-noise preamplifier built into the noise figure test set lowers the second-stage noise figure, thereby reducing a major source of measurement uncertainty. Measurement modes in the 8970B allow for double down-conversion using the 8971C as the second downconverter.
Simultaneous gain and noise figure measurements for amplifier characterization
Easy to compensate for tuner insertion loss for transistor characterization
Only for use with the 8970B (cannot be used with the NFA series)
Noise figure SSB: Standard is <=18 dB at 10 MHz - 30 MHz. With Option 002 is <=32 dB typical at 22 GHz - 26.5 GHz
Input Standing Wave Ratio SSB: 2.25, 2.5, 1.5, 2, 3 depending on frequency and option
Image and Odd Harmonic Rejection SSB: 20 dB typical
Remote programming: HP-IB programmable except LINE switch
DSB gain: 28 dB minimum
Maximum operating RF noise input power: -29, -26, -20 dBm depending on option and frequency
Maximum safe RF input power: -5, +20 dBm depending on option
LO input power minimum: +7, +1 dBm depending on option
LO input power maximum: +20, +7 dBm depending on option
Audible noise level: <5.5 bels at 1 meter
Noise Figure range: 0 to 30 dB
Input frequency range: Tunable from 10 to 26500 MHz