HP/AGILENT E5351A HIGH DENSITY ADAPTER

Bookmark and Share
Our Price:
225.0
Item #:
E5351A
Manufacturer:
Model #:
E5351A
Condition:
Seller Refurbished
Quantity
The Agilent E5351A unterminated Mictor probe conveniently connects to a target through a Mictor connector designed into the target. This probe offers the flexibility of designing probe terminations into the target—letting you minimize stubs when the connector cannot be placed close to the signals being probed. Route your signals to the location containing the Mictor connector and when you are ready to measure the signals, simply plug-in the Mictor probe. The probes can be used with a support shroud in environments where accidental unplugging of the probe is a concern. The E5351A can be used with any Agilent logic analyzer with a 40-pin cable connector.
34 channels: 32 single-ended data, 2 single-ended clock
3.0 pF equivalent load capacitance
Capable of data rates up to 600 Mb/s (maximum rate dependent on analyzer used)
500 mVp-p minimum signal amplitude
Mictor connector is easy to incorporate into your design
Support shrouds available for board thickness to 0.120 inches
Compatible with logic analyzers with 40-pin connectors
38-pin Mictor footprint